The Royal Enfield Interceptor Bear 650 scrambler has been leaked ahead of its official unveiling. The images you see here are thanks to the motorcycle having undergone its homologation process in Australia, suggesting that the official unveiling isn’t too far off.
- USD front fork, twin shocks
- 2-into-1 exhaust system
- Block pattern tyres
While there are obvious similarities to the standard Interceptor, this new model does feature several adaptations that make it better suited to some light off-roading. Moving front to back, the first change is the block-pattern tyres visible in the images, which will provide better grip when the tarmac runs out. The front wheel also appears noticeably larger than the rear, suggesting that RE has moved away from the 18in/18in combo on the Interceptor to perhaps a 19in/17in pairing on the Bear. This would be more in line with its intended role as a light off-roader, while also opening up more off-road friendly tyre options.
The other big change here is the upside-down fork, which replaces the conventional unit on the Interceptor. Not only is it inverted in construction, it also appears to provide longer travel, as do the twin shocks at the rear. As a result, ground clearance seems to have increased, and there is a good chance that seat height has also gone up. For reference, the standard Interceptor perches you 804mm off the deck.
Instrumentation has changed as well. The Interceptor’s twin-pod setup has made way for a more Scrambler-typical single-pod design on the Bear. This reduction in display area means that there will likely be a large digital display within the pod, if not a fully digital screen altogether.
While the engine itself appears pretty much unchanged, it does now exhale through a new exhaust setup – RE has gone the whole hog and opted for a 2-into-1 exhaust setup that looks very cool and is sure to have shaved a good chunk of weight. That said, it has routed the exhaust along the more sensible path, down under the engine, as opposed to the high-mounted design you see on something like the Triumph Scrambler 900 or 1200.
The fuel tank appears to be the same unit as that on the Interceptor, but the side panels have once again seen an injection of scrambler DNA, now featuring an additional oval shape that harks back to number plates on flat-track racers of yesteryears. The tail section has been redesigned, with the Bear sporting a round tail-lamp and a cleaner layout overall – though the rear tyre-to-mudguard gap is rather massive now. One unusual element in the tail section is the rear reflector, which sits on a rather long prong that stretches out underneath the number plate region. Whether this is specific to the Australian market, where the bike has been homologated, remains to be seen.
Because the engine seems more or less unchanged, you can expect output figures in the same ballpark as all the existing 650s – 47hp and 52Nm. The main frame on the Bear also appears the same as that on the Interceptor. However, the considerably different geometry and suspension setup will definitely impact the dynamics.
With official homologation now beginning to take place, it seems increasingly likely that we will see the Interceptor Bear 650 officially unveiled at EICMA in Milan this year. The show is scheduled to begin on November 5th. As far as pricing is concerned, expect the Interceptor Bear to cost a few tens of thousands more than the standard Interceptor, which costs between Rs 3.03 and Rs 3.31 lakh.
Also see:
Ved Janve
Azaman Chothia
Dinshaw Magol
Vishal Venugopal
