Ferrari unveils 296 Challenge Stradale

By Dhruv Dhaka
3 views
The road-legal, track-focused supercar gets a non-hybrid V6 producing 670hp, weighs 140kg less than the 296 GTB and makes 617kg of downforce.

Ferrari has unveiled the 296 Challenge Stradale alongside the 296 Challenge Evo race car at the 2026 Ferrari Finali Mondiali in Barcelona, Spain. The road-legal 296 Challenge Stradale is developed with a focus on track performance and draws heavily from the racing version. It revives the Challenge Stradale name, last used on the 360 CS in 2003.

Ferrari 296 Challenge Stradale: Powertrain

The 296 Challenge Stradale uses a 3.0-litre, 120-degree twin-turbo V6 engine without hybrid assistance. It produces 670hp at 8,000rpm and 740Nm of torque at 6,250rpm, and is paired with an 8-speed dual-clutch gearbox.

The removal of the hybrid system helps bring its claimed dry weight down to 1,330kg, which is 140kg less than the 296 GTB. Ferrari claims a 0-100kph time of 2.8 seconds, a 0-200kph time of 7.9 seconds and a top speed of over 300kph. It has also recorded a claimed lap time of 1 minute 18.5 seconds at Ferrari’s Fiorano test track.

Ad

Ferrari 296 Challenge Stradale: Exterior and chassis

The 296 Challenge Stradale features a fixed rear wing, a redesigned front splitter, additional aerodynamic elements and a fully enclosed underbody. These changes help it generate 617kg of downforce at 250kph, which is 72 percent more than the 296 GTB.

The car gets a new twin-exit exhaust system with larger tailpipes. Ferrari says this reduces back pressure and enhances the V6's higher-pitched exhaust note. An optional track-only exhaust is also available, but it can only be fitted or removed at an authorised Ferrari dealership.

Ferrari has also revised the suspension setup, including the spring rates and semi-active damper calibration. The company claims a 7 percent improvement in lateral performance, 34 percent better stability and a 68 percent reduction in roll gradient compared to the 296 GTB. The car gets carbon-ceramic brakes and Pirelli P Zero R and P Zero Trofeo RS tyres developed specifically for this model.

Ad

Ferrari 296 Challenge Stradale: Interior

Inside, the 296 Challenge Stradale retains the basic layout of the 296 GTB but uses a more stripped-back finish. The door panels are made from a single piece of carbon fibre and do away with the armrests and storage pockets. Buyers can also opt to remove additional trim beneath the seats, from the lower carpet area and beneath the centre console, leaving parts of the chassis exposed.

Ferrari 296 Challenge Evo

Ad

The 296 Challenge Evo is an evolution of the 296 Challenge race car, developed for the Ferrari Challenge one-make racing series. It will make its racing debut in the 2027 season, initially in the Europe and North America series. It uses the same 3.0-litre, twin-turbo V6 architecture without hybrid assistance, producing 700hp at 7,500rpm and 740Nm at 6,000rpm. Power is sent to the wheels through a 7-speed dual-clutch gearbox.

The Evo gets a revised aerodynamic package with High Downforce and Low Drag configurations. Maximum downforce is up 12 percent over the 296 Challenge, adding 100kg at 250kph, while the Low Drag setup reduces aerodynamic drag by 4 percent. The changes include a revised front splitter, redesigned rear diffuser, updated rear wing and new exterior mirrors.

Ferrari has also updated the traction control and electronic differential systems to improve stability and consistency over race distances. In its High Downforce configuration, the Evo recorded a lap time 0.8 seconds quicker than the 296 Challenge at Mugello.

More Stories

Suggested News

Ad

Ad